EN
Ideally, you are considering putting brand new tempered glass in your home or office. Well, if it is -you must install the piece correctly so as not to accidentally hurt your limbs/ cut or damage anything else. Don’t worry. If you have never installed tempered glass before, Star will help make it a breeze to install so that your screen stays crack-free on day one.
What is Tempered Glass?
But first, before you do so tempered glass means… This glass is known as toughened glass which is stronger than musliene and very much safe to use. It is very interesting to know the way how it made.SharedPreferences Tutorial Basically, they bake ordinary glass in a very hot oven. They then remove it from the oven and blast cold air over it to cool fast. This special process results in the glass being able to bear four or five times more pressure than regular glass. If it ever breaks, the Tempered glass will break into many small devilish pieces instead of shards and can become a nightmare.
Install Glass in an Expected Manner
Because of this, we recommend hiring a glass installer experienced in the installation to ensure everything remains undamaged during installation. On the other hand, if you are interested in trying it and feel comfortable doing so yourself, here is a list of tips that can make the job easier and more safe:
You will have to be clothing in protective gear always, wear gloves, long sleeves and safety Painted glass. This is necessary as it will prevent any pieces of the glass that might fall and break.
Before you install the glass, measure it and cut. As a rough guideline always remember to measure twice and cut once. This can prevent you from making errors that waste time and materials.
Thoroughly clean the place where you are going to attach this glass. With no dirt, or debris that would likely cause the glass to crack and break when you slid it in place.
Affix the glass on frame using silicon sealant fuel. Spread the sealant evenly when applying it. This will keep air bubbles out of the mix, as this would make your bond weaker.
Allowing the sealant to dry for 24 hours before supporting any weight or pressure on the Patterned glass. Because it helps a strong seal of the ziploc bag.
Do & Don't to Install Tempered Glass
Here are some important dos and don'ts for you to remember while installing tempered glass material:
Do's:
Before you put any weight on it, make sure its glass is stable and firm. That is without testing in place and falling or moving.
Go for a reliable glass supplier in order to obtain strong tempered glasses. That, you will know it is a safe and secure product.
With Glass install — make sure to read instructions or watch a few videos on how it's done before beginning. This way you will get a better idea of the process and can avoid making mistakes.
Don'ts:
Avoid installing tempered glass near areas where it trickles to the edges making breaks easily. Some ideas to keep it away from the traffic are, for instance, corners where you could knock or run over.
Do not try to force it into place while installing. Use a soft touch as you certainly do not want to shatter the lens.
Keep tempered glass out of busy spots where it may easily be hit frequently, or were people walk past a lot. It can keep it protected and in one piece.
How to install tempered glass step by step
Without further ado, now that you have a general idea of the dos and don'ts for tempered glass installation at home or in an office.
Tempered glass needs to be measured and cut, first. Be sure to measure carefully.
Instead, start by cleaning the space where you want to put in your glass. THIS IS AN ESSENTIAL STEP CLEAN HERE MEANS LESS VIBRATION LIMITING A SIMPLE INSTALL
Next, get the silicone sealant ready. Allow the coat to dry — if you use it too quickly after applying, it may slide around when placed on your frame.
This way you can safely set the tempered glass in its place on the frame. Ensure it is even. It should not wobble or tilt.
Thereafter, simply install a bead of silicone sealant around the perimeter of glass. Just make sure it is spread evenly and you should have a nice bond.
In the end, after application, allow 24 hours at least to dry out before any weight or pressure on glass. It is important, this time.
Checking Your Installation
You are done, congratulations you have just applied tempered glass. Monitor it over time to ensure that you...I sort of see where your going with this. Inspect cracks or damage for wear and tear You will see potential problems as early in the process as possible and keep your glass looking fabulous.
